Shijiazhuang Aier Machinery Co.,Ltd
Professional Pump Manufacturer
Add to Cart
Centriufgal Dredge Sand Suction Gravel Pump of wear resistant material high chrome cast iron A05 A49
Description of Sang Dredging Pump
| Material | Abrasive Resistant High Chrome alloy A05, A49 or As customer's request |
| Size | 4-16" |
| Pump Type | Single Stage Single SuctionCentrifugal slurry pumps |
| Drive | ZVz/CRz/CV/DC |
| Power | Motor/diesel |
| capacity | 36-4000m3/h |
| Head | 7-77m |
| Seal Type | Mechanical seal, packing seal , expeller seal |
| OEM Accepted | Yes |
Feature:
1. Horizontal, cantilevered..
2. Good performance of NPSH, anti-wearing and anti-corrosion, high efficiency
3. Easy installation. discharge outlet can be adjusted at any direction of 360.
4. Cylinder bearing assembly, grease lubrication, adjusting the distance between impeller and pump.
5. Mechanical seal, expeller seal and packing seal for selection.
6. Drive type: V-belt drive, gearbox drive, elastic coupling drive, fluid couplings drive, frequency conversion drive, silicon controlled rectifier speed regulation, etc
| Part Name | Material | Specification | HRC | Application | OEM Code |
| Bowl, door, back liner & impeller | Metal | AB27: 23%-30% chrome white iron | ≥56 | Used for higher wear condition with pH between 5 and 12 | A05 |
| AB15: 14%-18% chrome white iron | ≥59 | Used for higher wear condition | A07 | ||
| AB29: 27%-29% chrome white iron | 43 | Used for lower pH condition especially for FGD. It also can be used for low-sour condition and desulfuration installation with pH no less than 4 | A49 | ||
| AB33: 33%-37% chrome white iron | It can transport oxygenated slurry with pH not be less than 1 such as phospor-plaster, nitric acid, vitriol, phosphate etc. | A33 | |||
| Expeller & expeller ring | Metal | B27: 23%-30% chrome white iron | ≥56 | Used for higher wear condition with pH between 5 and 12 | A05 |
| Grey iron | G01 | ||||
| Stuffing Box | Metal | AB27: 23%-30% chrome white iron | ≥56 | Used for higher wear condition with pH between 5 and 12 | A05 |
| Grey iron | G01 | ||||
| Door clamp plate, bearing house & base | Metal | Grey iron | G01 | ||
| Ductile iron | D21 | ||||
| Shaft | Metal | Carbon steel | E05 |
Application:
Sand Dredging
Cyclone
Slag Cranulation
Suction Hopper
Mill Discharge
Sand Reclamation
Mine
Metal smelting blast slag delivery
| Model | Allowable Mating Max Power(kw) | Clear Water Performance | Max Particle Through | Impeller Diameter | ||||
| Max Capacity | Max Head | Max Allowed Speed | Max Efficiency | NPSH | ||||
| Q(m3/h) | H(m) | n(rpm) | ŋ(%) | (m) | (mm) | (mm) | ||
| 100WS-D | 60 | 320 | 52 | 1400 | 58 | 2.5-3.5 | 82 | 378 |
| 150WS-E | 120 | 790 | 50 | 1400 | 60 | 3-4.5 | 127 | 378 |
| 150WSG-F | 260 | 1050 | 86 | 1100 | 71 | 2-5 | 140 | 610 |
| 150WSG-S | 560 | 1050 | 86 | 1100 | 71 | 2-5 | 140 | 610 |
| 200WS-F | 260 | 900 | 50 | 1000 | 65 | 3-7.5 | 178 | 533 |
| 200WS-S | 560 | 900 | 50 | 1000 | 65 | 3-7.5 | 178 | 533 |
| 200WS-X | 560 | 900 | 50 | 1000 | 65 | 3-7.5 | 178 | 533 |
| 200WSG-S | 560 | 1420 | 80 | 950 | 72 | 2-5 | 180 | 686 |
| 200WSG-X | 560 | 1420 | 80 | 950 | 72 | 2-5 | 180 | 686 |
| 250WS-G | 600 | 1600 | 60 | 850 | 65 | 1.5-4.5 | 220 | 667 |
| 250WS-ST | 560 | 1600 | 60 | 850 | 65 | 1.5-4.5 | 220 | 667 |
| 250WSG-G | 600 | 2850 | 80 | 700 | 73 | 2-10 | 210 | 915 |
| 250WSG-T | 1200 | 2850 | 80 | 700 | 73 | 2-10 | 210 | 915 |
| 300WS-G | 600 | 3650 | 70 | 700 | 68 | 2-8 | 241 | 864 |
| 300WS-T | 1200 | 3650 | 70 | 700 | 68 | 2-8 | 241 | 864 |
| 350WS-G | 600 | 3600 | 44 | 500 | 70 | 3-9 | 254 | 1016 |
| 350WSG-TU | 1200 | 4000 | 70 | 500 | 72 | 3-6 | 230 | 1220 |
| 400WS-G | 600 | 4300 | 50 | 500 | 72 | 3-6 | 254 | 1067 |
| 400WS-TU | 1200 | 4300 | 50 | 500 | 72 | 3-6 | 254 | 1067 |
| 450WS-TU | 1200 | 5400 | 46 | 400 | 68 | 3-6 | 330 | 1270 |
